Show Notes
It's towing season and if your gauges are climbing on the way up the grade, you need to know what's actually normal and what's a real problem. Will and Myer break down coolant temps, transmission temps, and everything that can push a Dodge Cummins diesel truck out of range while towing.
They start with what a healthy cooling system looks like going down the road. Thermostat opening temps on these trucks typically run 180 to 200 degrees depending on year and setup, and they explain why a hotter or cooler thermostat matters for winter heat versus summer towing, along with how boiling points, radiator cap pressure, and elevation all affect what your coolant temperature can handle.
A big part of the episode covers fan clutches, since a bad cooling fan clutch is usually the first thing they check when a diesel truck runs hot. They explain how to tell if your mechanical fan clutch is engaging and why electric fans aren't actually an upgrade over the factory setup on these Cummins trucks.
From there they walk through testing a thermostat the old school way with a pot of boiling water, the bypass port a lot of guys don't know exists in the block, and why a genuine Cummins thermostat is worth it over the cheap parts store version, especially on a second gen Dodge.
Radiator condition gets its own conversation too. They cover why a clogged or dirty radiator causes most cooling problems, why a factory copper core radiator often beats a cheap aftermarket one, and how they've flushed old radiators back to life with everything from radiator flush products to straight vinegar. They also get into heater core plumbing and why oversized fittings from a repipe can hurt your cooling in the summer.
The conversation wraps up on transmission cooling, the second gen's heat exchanger setup, why factory transmissions are designed to run around 185 degrees, and why colder fluid on a built performance transmission tends to live longer.
Along the way Will and Myer share real diesel towing stories, from Willard's cooling performance on a run to Saint George to a second gen Dodge gauge that pegs out hard at 230 degrees, plus a few lessons learned the hard way about fan clutches and stuck thermostats.
If you found this useful, subscribe to the Power Driven Podcast on YouTube and follow along on your favorite podcast platform.
Will and Myer reference several parts from their own builds throughout the episode, including compound turbo setups, VGT turbochargers, and stage two and stage three injectors. Shop everything mentioned in this episode at PowerDriven.com links below.
Shop Power Driven Diesel: https://www.powerdriven.com
More from Power Driven Podcast
Single turbo or compound turbo: which one really makes more horsepower? This episode started with a comment from viewer @V8Lenny (youtube.com/@V8Lenny) claiming a single turbo will always make more power than the same charger run in compounds, so we put that claim up against years of diesel dyno numbers and real Cummins builds.
What happens when an $11,000 VP44 Cummins with a short parts list out tow trucks that cost five times as much? Willard, our 2001 Dodge Ram dually, just pulled a race trailer home from Diesels in the Mountains and held the speed limit up the grades. This episode breaks down why this old 24 valve keeps surprising everybody and what it takes to turn a 25 year old diesel truck into a legit cross country tow rig.
A shelf on cylinder head just won the biggest payday in diesel drag racing, and it beat trucks running heads that flow a lot more air. If you think bigger is always better on a race build, this episode of the Power Driven Podcast might make you rethink your whole combo.
What does it actually take to keep a Cummins alive past 3,000 horsepower on the dyno? It is not just more fuel and a bigger nitrous shot. This episode breaks down the real engineering behind Myer's second gen common rail race truck and why so many mega power builds scatter before the pull is over.
Every diesel guy has a list of mods he would take back, and in this episode Todd, Will, and Myer own up to theirs. From pushrods that snapped on a tow to Texas to a 12 valve Cummins quietly running out of oil, this is a shop floor confession about diesel truck mistakes that cost real time and money, and how to avoid repeating them on your own build.