Show Notes
Not all Cummins blocks are built the same, and if you are pushing serious power, the one under your hood matters more than most people think. Todd, Will, and Myer break down the full spectrum of Cummins engine blocks in this episode, from the various 12-valve generations to the 5.9 common rail and the 6.7, and explain exactly why the differences matter when the power numbers start climbing.
The 6.7 gets a lot of attention here, and for good reason. The conversation covers what makes it structurally superior to earlier platforms: a thicker deck, a larger bore, longer wrist pins, and pistons that have held up to 3,000 horsepower in competition builds without giving up. The guys talk through how modern tuning lets builders get even more out of what is essentially a factory race motor sitting in everyday trucks, and why the 6.7 has earned its reputation as the current king of Cummins diesel performance.
The 12-valve conversation goes deeper than most. There are meaningful differences between block variations that matter at high power levels, and the guys cover what to look for. Power Driven offers a 14-millimeter main stud upgrade across their block lineup, including as a standard feature on their 12-valve block, because the math on clamping force versus a stock bolt simply does not leave room for argument.
One topic worth paying attention to is the roller lifter issue on newer 6.7 trucks. The guys call it out as a real problem already hitting a significant number of engines, potentially on the scale of what the VP44 pump failure was for the 24-valve crowd. If you own a 2019-and-up Ram with a 6.7, this part of the conversation is worth your time.
There is also a breakdown of why dropping a 12-valve head onto a 6.7 block causes combustion problems. The 12-valve injector enters the cylinder at an angle, so the piston bowl is offset toward that injector. A centered bowl piston paired with an off-center injector creates combustion characteristics nobody wants. It is a simple geometry explanation that answers a question the comment section apparently asks regularly.
The guys wrap up with some real-world context, including Todd running 10-second passes in his tow truck and a story about winning the fastest pass at an airport drag race against mustangs and a supercharged F-150 on a 6.90 slip. The point being that the power these engines support on the street right now is genuinely historic.
If this episode has you thinking about your next block build, Power Driven has you covered with prepped and upgraded Cummins blocks and everything else mentioned in the episode at PowerDriven.com.
Shop Power Driven Diesel: https://www.powerdriven.com
More from Power Driven Podcast
Single turbo or compound turbo: which one really makes more horsepower? This episode started with a comment from viewer @V8Lenny (youtube.com/@V8Lenny) claiming a single turbo will always make more power than the same charger run in compounds, so we put that claim up against years of diesel dyno numbers and real Cummins builds.
What happens when an $11,000 VP44 Cummins with a short parts list out tow trucks that cost five times as much? Willard, our 2001 Dodge Ram dually, just pulled a race trailer home from Diesels in the Mountains and held the speed limit up the grades. This episode breaks down why this old 24 valve keeps surprising everybody and what it takes to turn a 25 year old diesel truck into a legit cross country tow rig.
A shelf on cylinder head just won the biggest payday in diesel drag racing, and it beat trucks running heads that flow a lot more air. If you think bigger is always better on a race build, this episode of the Power Driven Podcast might make you rethink your whole combo.
What does it actually take to keep a Cummins alive past 3,000 horsepower on the dyno? It is not just more fuel and a bigger nitrous shot. This episode breaks down the real engineering behind Myer's second gen common rail race truck and why so many mega power builds scatter before the pull is over.
Every diesel guy has a list of mods he would take back, and in this episode Todd, Will, and Myer own up to theirs. From pushrods that snapped on a tow to Texas to a 12 valve Cummins quietly running out of oil, this is a shop floor confession about diesel truck mistakes that cost real time and money, and how to avoid repeating them on your own build.