Show Notes
Most of us got into manufacturing because we love making parts. But the longer I run a shop, the more convinced I am that we're really in the logistics business. If your machines are running but parts are still late, the problem might not be production at all. This week, Paul Barnes and I break down the three flows that determine how well a shop performs: material, information, and decisions. We start with material flow, from reducing WIP and getting raw material to the machine faster, to how large manufacturers use everything from supplier-managed inventory to drones to keep production moving. Then we shift to information flow and why real-time visibility through your ERP can make or break communication on the shop floor. I also share a costly communication miss from our own shop this week. Finally, we tackle decision flow. Paul and I debate whether the answer is empowering people, adding capacity, or fixing the root cause. We don't agree on everything, but that's what makes the conversation valuable. We wrap up with practical ways to map your bottlenecks and improve flow before investing in more machines or people. Because the best shops don't just make parts. They keep work moving. What's Covered in this Episode (0:00) Intro and today's big idea: manufacturing is really a logistics business (3:16) The diagnostic questions: how long does material sit, and where does work wait on a decision? (4:22) Material flow: Staging, getting material to the machine fast, reducing WIP, and flying parts on drones (8:21) Kardex and vertical storage: saving floor space and speeding up inventory turnaround (9:26) Check out Elevate powered by AMT and Women in Manufacturing at IMTS 2026 (10:18) Just-in-time versus strategic inventory, and partnering with your material vendors (13:45) Vendor managed inventory: paying a supplier to stock your high runners and free up floor space (17:05) Material flow inside the facility and the five rights: part, place, time, quality, orientation (20:17) Why we created Hire MFG Leaders (and why you should use it) (20:46) Information flow: why a real-time ERP is the backbone of getting parts to the right place (25:48) The frozen production window and why releasing a job is a one-way decision (30:24) Executing the change: ProShop scheduling and the green, yellow, red visual system (32:46) Rapid response done right: confirming receipt so the message actually lands (35:30) Take your shop to the next level of capability with DN Solutions (36:41) Decision flow: how fast leadership responds when something goes wrong (38:33) Running out of tooling and gauges, and building systems that stop it from happening (40:20) Leadership bottlenecks: empowering and training the floor to make the call (43:24) The cost of waiting and when adding a person actually saves money (48:15) Operations is not king: the peaks and troughs you create in support departments (50:24) Old information stalls decisions (and the case for live data over yesterday's reports) (51:22) The financial impact: expedite fees, overtime, and downtime that delays your receivables (57:30) Find the top three things that interrupt flow, and fix flow before you buy equipment or hire Resources Mentioned Elevate powered by AMT and Women in Manufacturing Hire MFG Leaders DN Solutions ProShop ERP Kardex Connect with Jason Davis and Paul Barnes The Manufacturing Blueprint Connect on LinkedIn
More from The Manufacturing Blueprint
A rushed handoff. Missing inspection tools. An unspecified torque setting. By the next morning, an entire shift’s parts were out of tolerance—and my first instinct was to question the operator. But once we dug into what happened, the failure started long before he loaded the machine. In this episode, Paul and I talk about how to tell a people problem from a process problem, why your most experienced employees can become your biggest bottlenecks, and what leaders need to fix before demanding better results. From capturing tribal knowledge to improving shift handoffs, we explore how to build a shop where good work is repeatable—and accountability is fair. What's Covered in this Episode(0:00) A trial stand, a jury box, and a room full of baseball bats (1:34) Good people struggling inside broken systems (4:02) Deming and the share of problems that come from the system (4:54) The new operator who inherited 20 years of tribal knowledge (6:21) Fourteen wrong parts on second shift and the torque nobody specified (9:36) Is it a people problem, a process problem, or a leadership problem? (11:10) Would another reasonably competent person make the same mistake? (13:16) Kennametal: tooling built to cut faster and run longer (14:47) Did they know what was expected of them? (17:37) How many times a day do you give direction instead of setting a principle? (19:11) Gabe Draper with Factur dives into a go-to-market strategy for shops (25:18) Where broken systems show up, and the new items meeting (27:11) De-hero your processes with cross training and documentation (33:25) Why not turn a video of the task into an SOP? (34:26) Leaders who create leaders, and why principles beat decisions (40:05) Hennig Workflow Automation System: pallet automation for lights-out machining (40:56) What to fix first (and defining ownership with metrics) (45:42) Logging problems, and using AI to find past solutions (49:15) Clean handoffs between departments and between shifts (50:52) Why systems make accountability possible and the standard becomes the boss (52:53) A no blame zone: what part of the process allowed this? (55:33) Retrain, audit, escalate: a structure for problem solving (1:02:53) This week's challenge: people problem or broken system? Resources MentionedKennametal Factur Hennig Workflow Raw Material Podcast W. Edwards Deming Connect with Jason Davis and Paul BarnesThe Manufacturing Blueprint Connect on LinkedIn
Stress is the thing nobody puts on the agenda and everybody is carrying. So we decided to pull it apart. Where it actually comes from, which parts of it you can control, and what to do about the rest. Some of it you can't touch. Future orders, economic swings, material costs and tariffs, a customer who decides to move work offshore or things like 9-11, 2008, and COVID. But a lot of the stress inside a shop is homegrown. It comes from missing systems, undocumented processes, tribal knowledge, and plans that change in a random way instead of a controlled one. Delays equal stress, and most delays trace back to something nobody wrote down. Then there's the part that sits with us as leaders: Good leaders absorb stress, bad ones transfer it or create it. We get into staying calm when the floor isn't, defining the what and the deadline clearly while leaving the how to your team, building a safety net that lets people fail fast and fix it, and why the middle manager is usually the most squeezed person in the building. What's Covered in this Episode(0:00) The printer, the door, and a stress story that still gets a laugh (1:25) What actually creates stress inside a manufacturing organization? (4:55) Everybody is replaceable (and what that should do to your priorities) (5:38) Check out the Hennig Workflow Automation System for high mix machining (6:28) Short commutes, no decompression, and carrying work through the front door (11:52) The stresses you can't control: future orders, 9-11, 2008, COVID (14:22) Supply problems, customer shifts, and contracts lost to low cost countries (16:00) Healthy pressure versus destructive pressure (17:22) Why we created Hire MFG Leaders and why you should use it (17:50) Internal stress starts with a lack of systems (19:04) No standard work puts your leadership in permanent crisis mode (19:50) ERP, schedules, and notes good enough that someone can step into a setup cold (21:34) Changing the plan in a controlled way instead of creating chaos (23:20) Delays equal stress, and the customer who calls four times a day (28:02) Why calm leadership works the way a first responder's calm works (29:53) Stress clouds judgment and delays the easy decision (32:05) Solve your customer’s hardest questions with Navu (33:18) Good leaders absorb stress, bad leaders transfer it or create it (38:37) Define the what and the deadline, then leave the how to your team (44:31) Why you should listen to the Raw Material Podcast (45:06) How different roles have different stressors (47:22) Using how people handle stress as your promotion indicator (51:50) The case for the middle manager as the most squeezed role in the building (55:03) What does a stable manufacturing operation feel like? How do you reduce stress? (58:54) Low stress is not low standards, and what a calm floor really looks like Resources MentionedHennig Workflow Hire MFG Leaders Navu Raw Material Podcast Connect with Jason Davis and Paul BarnesThe Manufacturing Blueprint Connect on LinkedIn
Growth doesn’t create the cracks in your business—it puts pressure on the ones already there. The schedule gets tighter, your best people become bottlenecks, and decisions start piling up with the owner. Before long, the growth you wanted is controlling the shop instead of the other way around. In part two of our conversation about scaling a manufacturing business, Paul Barnes and I look at what needs to be built before the next surge of work arrives. We get into the uncomfortable questions around capacity, cross-training, systems, cash flow, and whether your leadership team is truly prepared to carry more responsibility. Because scaling isn’t simply adding another machine or hiring more people. It’s building a business that can handle more complexity without depending on you to hold everything together. If stepping away for a week would bring the shop to a halt, this episode is for you. What's Covered in this Episode(0:00) If everything depends on you, you're not ready to scale (1:32) Growth exposes the weaknesses already sitting in your foundation (2:27) Growth as the ultimate stress test of your systems, leadership, and culture (4:21) Capacity planning across three things: machines, people, and processes (5:03) Knowing the maximum capacity of every cell and where your bottlenecks are (6:20) Calculating true capacity versus theoretical capacity to protect your schedule (8:54) Why 85 percent utilization is the sweet spot (and it applies to people too…) (10:05) Running at 100 percent leaves no room for improvement projects or training (12:26) DN Solutions: SMX multitasking, DVF 5-axis machines, and automation (13:37) Adding a machine is quick, adding the skill to run it is not (17:54) What an SOP can't teach, and why the buddy system still matters (20:28) Navu: AI chat for your website, trained on your own content (21:40) Hire and promote your leaders before you're desperate for them (24:40) Don't drop a new leader into a mess and expect them to swim (26:49) When it's time for an ERP system, and what ProShop changed at D&D (33:37) The first metrics worth tracking: scrap, quality escapes, and on-time delivery (36:37) Add a machine or add a shift—and how to decide which one (42:40) Why you need to check out the Raw Material with Jamie Marzilli (43:06) Supply chain: forecasting with your vendors and avoiding single source (48:45) Forecasting and cash flow through a growth spike (53:31) Defining ownership so you stop being the decision bottleneck Resources MentionedDN Solutions Navu ProShop Raw Material Buy the Numbers Connect with Jason Davis and Paul BarnesThe Manufacturing Blueprint Connect on LinkedIn
Everybody says they want growth, until they get it.
Busy has become the default setting in manufacturing. Overtime is up, the schedule is full, everybody is moving, and we treat all of it as proof the business is working. This week Paul Barnes and I get into the operation that stays constantly busy and still falls behind.