Show Notes
We learned some things in 2025 that completely reshaped how we think about diesel performance, and a lot of it challenged what most people assume about power, smoke, and tuning.
This episode of the Power Driven Podcast is a year end breakdown featuring the Power Driven Diesel crew reflecting on everything they tested, broke, and learned throughout the year. The conversation covers diesel performance across multiple platforms including 12 valve Cummins, common rail Cummins, and VP44 setups, along with what real dyno testing and track time revealed. From R&D and turbo testing to race truck builds and tow rigs, this episode explains why small details in air, fuel, and timing matter more than chasing parts alone.
One of the biggest topics is smoke versus power and why adding fuel does not always mean more performance. They dig into the question of whether smoke adds power on a diesel and explain how different platforms respond, especially comparing older 12 valve technology to modern common rail engines. The discussion naturally leads into AFR tuning, running lean versus rich, and how nitrous diesel tuning completely changes the equation when it comes to heat, burn efficiency, and timing. There’s a deep look at nitrous on diesel engines, including why pulling timing with nitrous is critical, how automated nitrous control improves consistency in diesel drag racing, and why feed line size and solenoid flow actually matter.
Turbo upgrades and truck builds are another major focus. The crew breaks down real dyno results from turbo testing on different trucks, including the Junker drag truck, Windy, and Willard. They talk through GT55 and Aggressor turbo results, injector sizing lessons, and how some setups made more power than expected without bending factory rods. There’s also insight into wastegate testing, comparing screamer gate versus hot pipe gate setups on compound turbos.
The episode wraps with lessons on VP44 Cummins performance, towing capability, camshaft upgrades, cylinder head flow testing, and why there’s still a lot of untapped potential in Cummins head design.
Subscribe for more Power Driven Podcast episodes, follow along for more diesel performance testing, and check out everything Power Driven Diesel is building next.
More from Power Driven Podcast
Single turbo or compound turbo: which one really makes more horsepower? This episode started with a comment from viewer @V8Lenny (youtube.com/@V8Lenny) claiming a single turbo will always make more power than the same charger run in compounds, so we put that claim up against years of diesel dyno numbers and real Cummins builds.
What happens when an $11,000 VP44 Cummins with a short parts list out tow trucks that cost five times as much? Willard, our 2001 Dodge Ram dually, just pulled a race trailer home from Diesels in the Mountains and held the speed limit up the grades. This episode breaks down why this old 24 valve keeps surprising everybody and what it takes to turn a 25 year old diesel truck into a legit cross country tow rig.
A shelf on cylinder head just won the biggest payday in diesel drag racing, and it beat trucks running heads that flow a lot more air. If you think bigger is always better on a race build, this episode of the Power Driven Podcast might make you rethink your whole combo.
What does it actually take to keep a Cummins alive past 3,000 horsepower on the dyno? It is not just more fuel and a bigger nitrous shot. This episode breaks down the real engineering behind Myer's second gen common rail race truck and why so many mega power builds scatter before the pull is over.
Every diesel guy has a list of mods he would take back, and in this episode Todd, Will, and Myer own up to theirs. From pushrods that snapped on a tow to Texas to a 12 valve Cummins quietly running out of oil, this is a shop floor confession about diesel truck mistakes that cost real time and money, and how to avoid repeating them on your own build.