Episode 29: Pics, Patterns and Links for Beetles

Ok folks, here are some patterns and pics for Episode 29 on Beetles. First we'll talk about the whirligig beetles – in part because they are so cool. Here is a picture showing their split eyes. You can see the two eyes on the topside – used for seeing above water. And then if you look at the left side of the beetle (facing you) you can also see one of the lower eyes, used for seeing underwater. Pretty cool huh?

In this picture you can see their legs – the rear rudder like legs, the middle legs for propulsion and the front legs for grasping food.

Next are the water pennies – here is a picture from the topside –

And a picture from the bottoms side – where you can see the legs and the white gills on the underside.

And my water penny imitation – Schenk's Water Penny – which is just a Schenk's Cress Bug tied in a color to imitate a water penny. They are simple – make a dubbing loop at the rear of the fly, load it up with dubbing of your choice and color, spin it and wrap onto the hook. Then brush out to the sides and trim to flat on the top and bottom and round the sides to make a water penny larva imitation.

Predaceous diving beetles are next: This adult is one of the big guys – he is about an inch and half long. They are lots of smaller ones as well, however.

My imitation is tied with a bead head, deer hair body, raffia shell back and glass bead for an air bubble. Oh, and of course, rubber legs – because rubber legs are great! As it sits in the water the bead tips the head down like the naturals rest. Hence, I'm calling it the "Butt's Up". Here is the pattern:

Air bubble – glass bead Body – Black Deer Hair spun Shell back – black raffia Legs – rubber legs Head – bead or cone or dumbells

Here is Selene's Water Tiger (Predaceous Diving Beetle Larva) imitation – and pattern:

The Suspender: 1770 Daiichi Hook Bent strand of 0.20 non-lead wire to form head near the bend. Lash it on with the blunt end towards the bend to make a square shaped blunt base for the head. Two brown biots for the mandibles – facing outwards X-small plastic dumbell eyes Cover head with small amount of rabbit dubbing with guard hairs. Lash on tan scud back Ribbing – 6/0 tan thread Dub a bit more tan rabbit dubbing to finish head Dub beaver cream dubbing tapered to tail Fold back the scud back and lash down Tie down ribbing Pick out guard hairs for legs Tie on one CDC oiler puff natural dun with butt of feather behind the eye and the tuft over the eye

In contrast, to Predaceous Diving Beetles, Water Scavenger Beetles rest with their heads up. They look very similar – which you can see from the natural:

But the important differences are that when they grab an air bubble it covers the underside of their abdomen as well – hence I tied this imitation with a white underbody. I also tied it with wool (rather than deer hair) well, because I felt like it, and used foam for the shell back. Even though the fly strictly speaking rests butts up, I'm calling it a "head's up" because it it imitating a water scavenger beetle – and that's how the naturals rest. The fish aren't going to be able to tell a difference between the head end of a hook and the tail end…

"Head's Up" Body – spun wool, black on top and white on bottom Shellback – black foam, coated with black nail polish to give it shine Legs – rubber legs Head- bead,or cone, or dumbbells

For Riffle Beetles, I wanted something that shows the segmented body of the adult beetle, but has a bit of shine representing the fine layer of air around the body. Here you go:

Looks kinda like an ant imitation, doesn't it? Which is why I named it: "Eric's Not-an-Ant" Body –tungsten beads – large then small Legs – fine rubber legs Terrestrial Beetles: You know what terrestrials look like, so no need for pictures of the naturals – plus the point here is to just have a variety of sizes and shapes to imitate the naturals. So, here are some of our favorite patterns: Selene's Moon