Show Notes
Blown head gaskets are one of the most common headaches diesel guys run into once they start chasing real power, and this episode breaks down exactly why they happen and how to actually fix it for good.
Todd, Will, and Myer get into it after a viral clip of a 6.7 Cummins shooting fire straight out the front of cylinder number one, and use it as the jumping off point for a full breakdown of head gasket failure.
The guys tackle the biggest myth in the diesel world first, that high drive pressure is what blows head gaskets. It is not. High cylinder pressure from advanced timing is the real culprit, and they explain why a tighter turbo setup that makes drive pressure is just a sign of an engine that is going to make power down low, which is where the real cylinder pressure spike happens.
From there the conversation moves into sealing solutions, starting with fire ring gaskets and split firing, which the guys call the ultimate ceiling technique for a high performance diesel build. They compare that to Top Fuel dragster hoops and C ring style seals, and explain why a fire ring is still the go to for iron block Cummins applications running big power, whether it is a 12 valve, a 24 valve, or a VP44 setup.
There is a deep dive into crush specs, retorque procedure, and the difference between how MLS gaskets and older factory gaskets handle a little bit of leakage, along with the common mistakes guys make when resurfacing a head at home with the wrong tools.
The guys also walk through real world troubleshooting, covering coolant leaks after a firing job, how much crush is too much, and what brands like Hazel and Industrial Injection are doing differently with their gasket specs.
If you are building a diesel truck for serious horsepower and want to avoid blowing a head gasket, or you are already dealing with one and trying to figure out why, this episode gives you the real explanation instead of the Facebook forum version.
Subscribe to the Power Driven Podcast on YouTube and follow along on your favorite podcast platform so you never miss an episode.
This episode is all about head gasket sealing, and the fire ring head gaskets Todd, Will, and Myer talk about are built and sold right through Power Driven Diesel. Shop everything mentioned in this episode at PowerDriven.com
Shop Power Driven Diesel: https://www.powerdriven.com
More from Power Driven Podcast
Single turbo or compound turbo: which one really makes more horsepower? This episode started with a comment from viewer @V8Lenny (youtube.com/@V8Lenny) claiming a single turbo will always make more power than the same charger run in compounds, so we put that claim up against years of diesel dyno numbers and real Cummins builds.
What happens when an $11,000 VP44 Cummins with a short parts list out tow trucks that cost five times as much? Willard, our 2001 Dodge Ram dually, just pulled a race trailer home from Diesels in the Mountains and held the speed limit up the grades. This episode breaks down why this old 24 valve keeps surprising everybody and what it takes to turn a 25 year old diesel truck into a legit cross country tow rig.
A shelf on cylinder head just won the biggest payday in diesel drag racing, and it beat trucks running heads that flow a lot more air. If you think bigger is always better on a race build, this episode of the Power Driven Podcast might make you rethink your whole combo.
What does it actually take to keep a Cummins alive past 3,000 horsepower on the dyno? It is not just more fuel and a bigger nitrous shot. This episode breaks down the real engineering behind Myer's second gen common rail race truck and why so many mega power builds scatter before the pull is over.
Every diesel guy has a list of mods he would take back, and in this episode Todd, Will, and Myer own up to theirs. From pushrods that snapped on a tow to Texas to a 12 valve Cummins quietly running out of oil, this is a shop floor confession about diesel truck mistakes that cost real time and money, and how to avoid repeating them on your own build.